bar shutters

Reading 0118 981 7300

Bar Shutters, Servery and Reception Shutters styled to match your needs

bar shutters

bar security shutters

servery shutters

bar roller shutters

We have over 28 years expeience in the supply and installation of bar shutters and grilles, bar roller shutters and internal bar servery shutters for protection of restricted areas or 'standalone' cabinets in a wide range of premises including leisure centres, clubs, halls, retail shops, schools, bars, reception counters, display areas and serveries. We can supply these as either solid roller shutters or punched or perforated slats creating a balance between security and display designed to your exact requirements.

For many applications as the roller shutter is designed mainly for use in low risk internal areas they do not always need to be as strong as external security shutters and this can be reflected in the cost. Shutter slats are either of 38mm double skinned extruded aluminium or a larger 77mm single wall extruded aluminium slat which provides optimum sterength whilst delivering around 58% vision.

The standard colours of our bar shutters are white or brown, however they can be powder coated in a variety of coloured finishes to match your decor. All our shutters are made to measure to your exact requirements and fully installed by our experienced installers.

A choice of external or reveal fitting roller shutters with different operating methods

The roller shutter box can be fitted onto the external face of your opening or internally on the reveal. There are a choice of shutter operation methods.

Rod Crank shutters are operated using a geared rod crank winding handle which, when not in use, is cliped underneath the box.
Spring Loaded shutters are used for external operation which is useful for exit doors or counters and bar servery area. A lock can be incorporated into the bottom slat if required. Motor & Switch operation are best for larger shutters but can also be used on smaller installations. Motors are fitted inside the shutter axle and operation is usually by rocker switch, key switch or remote control as standard but other controls methods are available. In the event of a power supply failure a manual override can be added to operate from inside. Where desirable a manual override can also be engaged through the outside of an externally fitted shutter box. Under these circumstances a lockable override cover is available. Multi-shutter installations can also be operated from a central or group of switches.

For the electric operation control units are available as both single motor and group command activated motors for multiple shutters, so that shutters can be operated individually or in groups. Single rooms can be controlled individually, ensuring that the shutters are only operated in full sight of the user. We have a range of both wireless and wired control units.

Need help? Use our online chat during office hours, leave us a message or call us on 0118 981 7300 to arrange a free site visit or discuss the best security solutions for you.